Power Tool-Specific Carbon Brushes
Subtitle：For Drills/Angle Grinders/Cutters, End Frequent Replacement Troubles
1. Why Choose Power Tool-Specific Carbon Brushes?
Core Differences：
- Ordinary Carbon Brushes: Poor compatibility, easy jamming; Must be replaced every 1-2 months under high-frequency use; Large sparks easily damage motors
- Special Carbon Brushes: Precisely match tool models; Wear rate reduced by 40%, service life doubled; Spark suppression reaches Grade A to protect motors
2. Three Core Advantages, Meeting Tool Usage Needs
1. Super Wear-Resistant Formula, Withstanding High-Frequency Operations
- Adopts "high-density graphite + copper powder alloy" base material, pressed at 2600℃ high temperature, hardness up to Rockwell HRB 85
- Suitable for heavy-load scenarios such as electric hammer impact and high-speed angle grinder cutting, no obvious wear after 8 hours of continuous operation
2. Precise Sizes, Zero Installation Threshold
- Comes with installation manual and tool disassembly diagram, beginners can replace it in 5 minutes
- Brush (Brush : Brush pigtail) uses high-conductivity flexible copper wire to avoid breakage during installation and ensure stable contact
3. Low Resistance & Low Noise, Protecting Tool Motors
- Sparks during commutation are controlled to "faint blue fire" to avoid commutator ablation and extend motor life by 30%
- Compatible with 12V-220V power tools, from household small drills to industrial-grade cutters
3. Product Series, Choose According to Needs
Series Name |
Applicable Tool Types |
Core Features |
Recommended Users |
Image |
Household Economy Series |
Small drills, jigsaws, sanders |
Cost-effective, sufficient wear resistance |
Home DIY, occasional use |
|
Professional Durable Series |
Electric hammers, angle grinders, circular saws |
Impact-resistant, heavy-load resistant |
Decoration workers, plumbers |
|
Industrial Heavy-Duty Series |
Large cutters, stone grinders |
High temperature resistant (100℃), overload resistant |
Factory workshops, stone processing |
|
4. Quality Assurance & Considerate Service
1. Strict Quality Control, Worry-Free Use
- 【Quality Inspection Flow Chart】Four-step quality inspection from "Raw Material Testing → Molding Test → Spark Experiment → Size Calibration", marked with "100% Qualified Before Delivery for Each Batch"
- Warranty Commitment: 6-month warranty under normal use, free replacement for non-human damage
2. Service Upgrade, Easy Selection
- Supports "tool model customization", non-standard sizes can be delivered in 3 days
Purchase & Consultation
- Online Purchase: https://toolpart.en.alibaba.com
- Service Hotline: +86-13738735976
Choose the Right Carbon Brush, Make Power Tools Run More Durably!
EN
